Dover Wayne Helix WM048523 - Hose Handling; 6000 C style models - IEC

6.25 Hose Handling
6.25.1 6000 C style models - IEC
This section covers nozzle boot, hose and hose retractor service for Helix 6000 C style models
used in IEC regions.
1
Turn off power to the dispenser and drain hose.
2
Locate the four screws on top of the dispenser as shown in Figure 6.82.
Figure 6.82: Top cover
WM048523 Rev 08 01/2019 147
6 Replacement Procedures