14.1 Bezel Components
Components on the inside of the VGA media bezel are shown in Fig 14.2.
H
G
F
D
C
B
I
A
E
Sales Vol Display and
Controller Board Ass'y
R2 Board
VGA Softkey
VGA Softkey
Fan
VGA Backlight
Driver Board
Speaker
p/o glass
panel ass'y
Buzzer
Main Mounting
Bracket
Bezel/Frame
Secure
Door
Board
Figure 14.2: VGA bezel frame inside view, without preset keypad
Tool size as follows:
Reference Fig 14.2 above.
A = Sales display, 4 nuts, use 7 mm socket
B = Main mounting bracket, 4 screws, use 3 mm hex key
C = R2 board mounting bracket, 4 nuts, use 7 mm socket
D = R2 board, 6 screws, use 2.5 mm hex key
E = Secure Door board, 4 screws, use 3 mm hex key
F = Softkey, 3 screws, 2.5 mm hex key
G = VGA display, (underneath R2 board bracket), 4 nuts, use 5.5 mm socket
H = VGA backlight board, 4 screws, use 2.5 mm hex key
I = Metal bezel panel, 8 screws, use #20 Torx screwdriver
206 WM048523 Rev 08 01/2019
14 Models with Metal Electronic Head - IEC
To Next Page
Loading...
