Dover Wayne Helix WM048523 - Fan; EMT Totalizers

14.3.8 Fan
See previous Figure 14.2 and the figures below.
1
Remove the two nuts that secure the fan bracket to the main bracket. Use a 5 mm socket.
Nut, 2
2
Disconnect the fan power cable from the VGA backlight driver board.
3
Lift fan bracket from the main bracket.
14.3.9 EMT Totalizers
The EMT's have a spring tab on each side that locks the EMT into the bezel bracket.
1
Disconnect the EMT cable.
WM048523 Rev 08 01/2019 235
14 Models with Metal Electronic Head - IEC