Dover Wayne Helix WM048523 - Hose Outlet Casting and Retainer Clip

2.6 Hose Outlet Casting and Retainer Clip
The new outlet casting on Helix dispensers, shown in Figure 2.6 below, is smaller and lighter
weight than the outlet castings used on previous model series. In addition, as shown in Figure
2.7, this casting incorporates the use of a metal retainer clip that secures the triple bump tube.
With this design, and with the use of the new tube removal tool shown in Figure 2.8, service
technicians will no longer need to use ladders to access the top of the dispenser when removing
product tubes. There are 1, 2, and 3 product outlet castings.
2 Product Outlet 1 Product Outlet
Figure 2.6: Hose Outlet Castings
WM048523 Rev 08 01/2019 19
2 Hydraulics