33
The system is now in Operation mode. Press CANCEL to finish and wait for the online POS
prompt.
34
The offline prompt will be displayed until communications are established with the POS. The
default prompt is shown below. Run test sales to verify operation.
Offline Prompt Screen
Note!
The iX Pay software version number is shown on the configuration report that printed earlier
in this procedure. The software ID will be shown under the Product Name on the printout. To
view this information on the screen, select Sys Info and the screen below will be displayed.
To print a configuration report at any time showing the software version number, go into the
Diagnostic mode and go to the printer test.
System Info Screen
342 WM048523 Rev 08 01/2019
A iX Pay™ Secure Payment Configuration U.S. Version (Optional)
To Next Page
Loading...
