Dynamic RHINO2 User Manual

Chapter 5: Diagnostics
116
5.6 Service Scheduler
The Service Scheduler is a preventative maintenance feature that allows the OEM to set up
scheduled servicing plans for their scooter customers.
If enabled, a Service Period can be programmed into the controller. Once the Drive Time
exceeds this value, the status LED will flash slowly 3 times every time the scooter is turned on or
wakes up from sleep, to indicate the service is due.
To enable the Service Scheduler function, set Service Scheduler (4.4.8.1) to 'Yes' and set
Service Period to the desired number of drive time hours before a service is due.
To clear the service indication, either increase the value of Service Period to a value larger
than the current drive time, or erase the controller history with the Wizard:
Tools -> Erase Controller History.
Note:
Erasing the controller history erases the fault log as well.
Consequently, erasing the controller history to erase the fault log will reset the
service scheduler as well.

Dynamic RHINO2 Specifications

General

Brand	Dynamic
Model	RHINO2
Category	Controller
Language	English