Water level
Setting Description
H (Extern 1)
> Tick checkbox for water level measurement with an additional external water level sensor
(e. g. hydrostatic or ultrasonic water level sensor).
(value equals parameter name “HWater” or “HAir” in database)
Click Apply to save settings.
H (Fix) This option is used for measurements in full pipes where no level measurements are required or
in case of sensor failure.
> Tick checkbox to manually enter a fix value for water level.
Click Apply to save settings.
Programming
Page 48 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
