Backup & Update
Setting Description
Load (continued)
Click Start to load file.
If the selected file does not correspond to the measuring
system the following error message is displayed.
If the upload was successful, the system reboots.
Click OK to restart the system again.
Software update
The manufacturer will provide you with the update file updatemt.tgz.
Copy the file to your PC, Tablet etc.
Always make sure to backup your data before starting an update. Only upload update files that are exclusively
provided for your device by the manufacturer.
Please select a file
Click Search / Durchsuchen and select update file from your directory.
Click Upload to load the file to transmitter.
File name Display of update file name.
File size Display of update file size.
Click Update for software update.
Restart transmitter after successful software update.
> press Reset / Restart key of transmitter.
Programming
Page 99 March 2021 HYB-UM-03155-EN-03
To Next Page
Loading...
