2017.06.19 FwdMan2.8.17.docx 19-161
6=yards
7=Miles
[7] NA
[8] NA
[9] NA
[10] 0 Pressure unit 0=kPa 1=psi
[11] 0 Weight (mass) 0=kg 1=lb
[12] 0 Distances 0=mm 1=in
[13] 0 NA
[14,15] 1 Lines per Station ID (ONE)
[16,17] 1 Lines per Drop (ONE)
[18,32] NA
23. " 0 0.0 0 0.0 ."
Accepted Variations.
[1,6] 0 Load (kPa or psi) @) [1,4]
[7,10] 0.0 - (percent) @) [5,8]
[11,16] 0 Deflection (mu or mil) @) [9,12]
[17,20] 0.0 - (percent) @) [13,16]
[21,32] Reserved
24. "*Subsection ...
SUBSECTION ID
[1] * Subsection Prefix character
[2,61] User specified (see line 27)
25. NA
26. NA
27. NA
28. " 300 0 200 -200 0 0 0 0 0 0
Diameter of Plate and
Y-Positions: Off center-line complement to line 3 (mm or in).
Positive to the “Left”.
[1,6] Diameter of Plate (mm or in).
[7,12] 0 Centre dummy, probably ZERO
[13,18] 200 Distance from centerline Chnl.2
[19,24] -200 - - - - 3
etc. in fields: [25,30] [31,36] [37,42] [43,48] ....
29. " 10 54 112 556"
Approximate Sequence and Drop totals.
[ 1, 8] 10 No of Sequences stored in this file
[ 9,16] 54 - - Drops - - - -
[17,24] 112 Total No of Sequences
[25,32] 556 - - - Drops
30. " A1aaB2bbC3ccD4dd...........
copy of line 31 below
31. "A111B222C333D444...........
[1,89] Sequence step types (most recently used).
A..D: Seating drops (never stored)
1..4: Drops at heights 1 to 4 (stored).
e..n: “Load Sensing” drops (stored).
P: Pause.
R: Resettle loading plate.
S: Stop (leave plate on the ground).
32. NA
33. ".***.***.***.***
To Next Page
Loading...