4=km extended
5=feet
6=yards
7=Miles
8=Miles ext. ext.
9=Miles.feet
[7] 0 Tmp. Prompt(s) 0=OFF 1=ON
[8] 1 Cnd. Prompt 0=OFF 1=ON
[9] 0 Roll off check 0=OFF 1=ON
[10] 0 Pressure unit 0=kPa 1=psi
[11] 0 Weight (mass) 0=kg 1=lb
[12] 0 Distances 0=mm 1=in
[13] 2 Station Step Mode, 0=No 1=Fixed 2=Logical
[14,15] 1 Lines per Station ID (ONE)
[16,17] 1 Lines per Drop (ONE)
[18,32] Reserved
23. "5 2 5 2 "
[1,4] 5 Allowed LOAD Variation (kPa)
[5,8] 2 - - - (percent)
[9,12] 5 - Deflection - (mu)
[13,16] 2 - - - (percent)
[17,32] Reserved
24. Last stored SUBSECTION ID (see line 37).
25. "DtCty PxNnnnS 000+0.0 000+0.0 St ....
[1,32] or [1,60] Roadway ID TEMPLATE
26. " Cty P Nnnn
[1,32] or [1,60] File name generation mask
27. "000+0.0 000+0.0 St ...
[1,32] or [1,60] Roadway Subsection ID TEMPLATE
28. " 300 0 200-200 0 0 0 0"
Diameter of Plate and
Y-Positions: Off center-line complement to line 3.
Positive to the “Left”.
[1,4] 300 Diameter of Plate (mm).
[5,8] 0 Centre dummy, probably ZERO
[9,12] Distance from center-line Chnl.2 (mm)
[13,16] - - - - - 3 -
[17,20] - - - - - 4 -
[21,24] - - - - - 5 -
[25,28] - - - - - 6 -
[29,32] - - - - - 7 -
[33,38] Diameter of plate (inches)
[39,44] Zero
[45,50] Distance from center-line Chnl.2 (inches)
[51,56] - - - - - 3 -
[57,62] - - - - - 4 -
[63,68] - - - - - 5 -
[69,74] - - - - - 6 -
[75,80] - - - - - 7 -
29. " 10 54 112 556"
APPROXIMATE Sequence and Drop totals.
[ 1, 8] 10 No of Sequences stored in this file
[ 9,16] 54 - - Drops - - - -
[17,24] 112 Total No of Sequences
To Next Page
Loading...