7.10 Debounce 633
7.10.1 Configuring input debouncing on a base device with a display 633
7.10.2 Configuring input debouncing in easySoft 8 633
7.11 P buttons 634
7.11.1 Configuring the P buttons on a base device with a display 634
7.11.2 Configuring the P buttons in easySoft 8 634
7.12 Define program name 635
7.13 Retention function 636
7.13.1 Retention in easySoft 8 638
7.14 Security – password protection 639
7.14.1 Configuring the password on a base device with a display 639
7.14.1.1 What happens if you forget your password or enter the wrong
password? 642
7.15 Configuring the microSD card and device ID 643
7.16 Time and Date setting 644
8. How easyE4 works internally 649
8.1 Program execution 649
8.2 Transferring an existing circuit diagram 652
8.3 Device information 653
8.4 NET network 654
8.5 Operating states easyE4 657
8.6 Controlling the backlight with operands 658
8.6.1 Backlight intensity 658
8.6.2 Background color 658
8.7 Device easyE4 time responses 661
8.7.1 Time behavior of the inputs and outputs 661
8.7.2 Base device timing 662
8.7.2.1 Delay time for operation with DC power supply 662
8.7.2.2 Delay time for operation with AC power supply 664
8.7.3 Timing characteristics of expansion devices 666
8.7.3.1 Delay time for AC expansion devices 667
9. Operating system diagnostic messages 669
9.1 Diagnostic messages easy communication module 671
10
easyE402/24 MN050009ENEaton.com
To Next Page
Loading...
Need help?
General