Eaton easyE4 User Manual

6.3.1 General 588
6.3.1.1 General information on user function blocks 589
6.3.2 Creating a user function block 589
6.3.3 Configuring a user function block 591
6.3.4 Programming a user function block 596
6.3.4.1 Programming view tabs 597
6.3.5 Adding comments to user function blocks 598
6.3.6 Calling a user function block in the main program 599
6.3.6.1 User function blocks in an ST main program 602
6.3.7 Saving a user function block 604
6.3.8 Exporting a user function block 608
6.3.8.1 Plausibility check 608
6.3.9 Importing a user function block 610
6.3.10 Replacing a user function block 611
6.3.11 Deleting a user function block 613
6.3.12 Comparing user function blocks 614
6.3.13 Printing a user function block 615
6.4 Timing and counter relay example 616
7. System settings 619
7.1 System options - Base device with display and buttons 620
7.2 Display 621
7.3 Device ID 621
7.4 Splash screen 622
7.5 NET 623
7.6 Ethernet 625
7.7 Update 627
7.8 Switch languages 629
7.9 Setting the startup behavior 630
7.9.1 Enabling / disabling the RUN START option 631
7.9.1.1 Configuration on a base device with a display 631
7.9.2 Enabling / disabling the CARD START option 631
7.9.2.1 Configuration on a base device with a display 632
7.9.2.2 Configuration in easySoft 8 632
easyE402/24 MN050009ENEaton.com
9

Eaton easyE4 Specifications

General

Brand	Eaton
Model	easyE4
Category	Relays
Language	English