Eaton EDR 3000 - Page 643

EDR-3000 IM02602003E
Device Planning Parameters of the Failure Simulator
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Use [Device Planning]
Global Protection Parameter of the Failure Simulator
Parameter Description Setting range Default Menu path
PreFault Pre Fault Duration 0.00 - 300.00s 0.0s [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Sgen
/Configuration
/Times]
FaultSimulation Duration of Fault Simulation 0.00 - 10800.00s 0.0s [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Sgen
/Configuration
/Times]
PostFault PostFault 0.00 - 300.00s 0.0s [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Sgen
/Configuration
/Times]
TripCmd Mode Trip Command Mode No TripCmd,
With TripCmd
No TripCmd [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Sgen
/Process]
www.eaton.com 631