EDR-3000 IM02602003E
Name Description
Sys.Maint Mode Inactive Signal: Arc Flash Reduction Maintenance Inactive
Sys.MaintMode Manually Signal: Arc Flash Reduction Maintenance Manual Mode
Sys.Maint Mode Comm Signal: Arc Flash Reduction Maintenance Comm Mode
Sys.Maint Mode DI Signal: Arc Flash Reduction Maintenance Digital Input Mode
Sys.Ack LED Signal: LEDs Acknowledgment
Sys.Ack RO Signal: Acknowledgment of the Relay Outputs
Sys.Ack Comm Signal: Acknowledge Communication
Sys.Ack TripCmd Signal: Reset Trip Command
Sys.Ack LED-HMI Signal: LEDs Acknowledgment :HMI
Sys.Ack RO-HMI Signal: Acknowledgment of the Relay Outputs :HMI
Sys.Ack Comm-HMI Signal: Acknowledge Communication :HMI
Sys.Ack TripCmd-HMI Signal: Reset Trip Command :HMI
Sys.Ack LED-Comm Signal: LEDs Acknowledgment :Communication
Sys.Ack RO-Comm Signal: Acknowledgment of the Relay Outputs :Communication
Sys.Ack Counter-Comm Signal: Reset of all Counters :Communication
Sys.Ack Comm-Comm Signal: Acknowledge Communication :Communication
Sys.Ack TripCmd-Comm Signal: Reset Trip Command :Communication
Sys.Ack LED-I Module Input State: LEDs Acknowledgment by Digital Input.
Sys.Ack RO-I Module Input State: Acknowledgment of the Relay Outputs.
Sys.Ack Comm-I Module Input State: Acknowledge Communication via Digital Input. The replica that Communication has
received from the device is to be reset.
Sys.PS1-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS2-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS3-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS4-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.Maint Mode-I Module Input State: Arc Flash Reduction Maintenance Switch
www.eaton.com 745
To Next Page
Loading...
