Electronic components
• Check that these are in good condition.
• Make sure that the horn works correctly.
• Make sure that the display or LEDs on the user interface are working correctly.
Hydraulic system and oil level in the tank
• Check that there are no leaks from the hydraulic hoses,
lines and connections.
• Make sure that all security seal wires (Ex. LHV, dump
valves, etc...) are not broken. Always go to/contact an
authorised service workshop when the seal wire has
been broken.
• Check oil level in the tank. If necessary, fill to correct level.
NOTE
Always place the vehicle on level ground
with the crane in transport position while
checking the oil.
Slewing motors condition
• Make sure that the slewing motors with the base attachment screws/bolts are not broken or
loose. Check that they are in good condition and in place.
DANGER
If you find broken or loose bolts:
• Do not use the crane.
• Have the damage repaired immediately by an authorised service workshop.
Filters
• Always check the filter indicators when the crane is in working conditions. If it indicates that the
filter is clogged, a workshop must replace the cartridge.
Maintenance and Service
EFFER 265-315-395-525 Progress 2.0 CE 147
To Next Page
Loading...
