Eldes ESIM384 - Page 14

14
14
EN
ESIM384 Installation and Conguration Manual v1.1
Communication bus fail/restore – status Enabled
  
IP connection failed – code 360

IP connection failed – status Enabled
  
Zone bypass/Bypassed zone activation – code 570

Zone bypass/Bypassed zone activation – status Enabled
  
CO sensor lifetime exceeded -code 380

CO sensor lifetime exceeded -status Enabled
  
Critical CO level - code 162

Critical CO level - status Enabled
  
Report/Control zone triggered/restored – code 150

Report/Control zone triggered/restored – status Disabled
  
Armed/disarmed in STAY mode – code 441

Armed/disarmed in STAY mode – status Enabled
  
Conguration via remote connection started -
code
412

Conguration via remote connection started -
status
Disabled
  
Silent/Panic zone alarm/restore - code 120

Silent/Panic zone alarm/restore - status Enabled
  
Armed/disarmed automatically - code 403

Armed/disarmed automatically - status Enabled

SMS sending limit reached - code 458

SMS sending limit reached - status Disabled

Communication with MS failed - code 354

Communication with MS failed - status Disabled

Control / Scheduler
Parameter Default Value
Congurable by:
SMS EKB2
EKB3/
EKB3W/
EWKB4
Conguration
Software
PGM output control 1... 16 Disabled

Scheduler 1... 16 Disabled

Additional conditions Disabled

Peripheral Devices
Parameter Default Value
Congurable by:
SMS EKB2
EKB3/
EKB3W/
EWKB4
Conguration
Software
Keypads
Keypad 1... 4 partition Partition 1
  
Show armed status in keypad Disabled

Keypad partition switch Disabled
  
EKB3 mode 2 partitions

Wireless keypads - partition Partition 1
  
Wireless keypads – backlight timeout 10 seconds

Wireless keypads – bell Disabled

Siren
EWS2 LED Enabled
  
Bell squawk Disabled
  
Activate siren if wireless device is lost Disabled
  
EWS3 re alarm LED Disabled
  
EWS3 alarm LED Disabled
  
Bell squawk enabled if arming in STAY mode Disabled
  
Temperature Sensors
Temperature sensor 1... 8 name N/A


Temperature sensor 1... 8 min. temperature 0

  
Temperature sensor 1... 8 max. temperature 0

  
Primary No.1

  
Secondary No.2

  
iButton Keys
iButton key name N/A
