Eldes ESIM384 - Page 144

144
144
EN
ESIM384 Installation and Conguration Manual v1.1
EKB3/
EKB3W/
EWKB4
Enter parameter 24, event number and parameter status value:
24 01 1 # – Burglary alarm/restore
24 02 1 # – Mains power loss/restore
24 03 1 # – Armed/disarmed by user
24 04 1 # – Test event
24 05 1 # – Battery failed
24 06 1 # – Battery dead or missing/battery connection restore
24 07 1 # – Tamper alarm/restore
24 08 1 # – Instant Silent zone alarm/restore
24 09 1 # – Kronos ping
24 10 1 # – System started
24 13 1 # – 24-Hour zone alarm/restore
24 14 1 # – Fire zone alarm/restore
24 15 1 # – Low battery
24 16 1 # – Temperature risen
24 17 1 # – Temperature fallen
24 18 1 # – Wireless signal loss/restore
24 19 1 # – Disarmed by user (Duress code)
24 20 1 # – SGS code entered
24 21 1 # – Armed by user (partial arm)
24 22 1 # – Siren fail/restore
24 23 1 # –RF jammer detected/RF jamming stopped
24 24 1 # –Date/time not set
24 25 1 # – GSM connection failed
24 26 1 # – GSM/GPRS antenna fail/restore
24 27 1 # – System shutdown
24 28 1 # – Communication bus fail/restore
24 29 1 # – IP connection failed
24 31 1 # – Zone bypassed/activated
24 32 1 # – CO sensor lifetime exceeded
24 33 1 # – CO level critical
24 34 1 # – Report/Control zone triggered/restored
24 35 1 # – Armed/disarmed in STAY mode
24 36 1 # – Conguration via remote connection started
24 37 1 # – Panic/Silent zone alarm/restore
24 38 1 # – Armed/disarmed automatically
24 39 1 # – SMS sending limit reached/removed
Example: 24031#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.