Eldes ESIM384 - Page 149

149
149
EN
ESIM384 Installation and Conguration Manual v1.1
EKB2
Menu path:
Server 1: OK → iiii → OK → MS SETTINGS → OK → IP SETTINGS → OK → SERVER IP → OK →
SERVER IP → OK → add.add. add.add → OK
Server 2: ... → SERVER2 IP → OK → SERVER IP → OK → add.add. add.add → OK
Server 3: ... → SERVER3 IP → OK → SERVER IP → OK → add.add. add.add → OK
Value: iiii – 4-digit installer code; add.add.add.add – server IP address.
EKB3/
EKB3W/
EWKB4
Enter parameter 40 and server IP address/parameter 96, parameter number and
server IP address:
Server 1: 40 add add add add #
Server 2: 96 02 add add add add #
Server 3: 96 03 add add add add #
Value: add add add add – server IP address.
Example: 40065082119005#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.
Set server port
SMS
SMS text message content:
Server 1: ssss_SETGPRS:PORT:pprrt
Value: ssss – 4-digit SMS password; pprrt – server port number, range – [1... 65535].
Example: 1111_SETGPRS:PORT:5521
EKB2
Menu path:
Server 1: OK → iiii → OK → MS SETTINGS → OK → IP SETTINGS → OK → SERVER IP → SERVER
PORT → OK → pprrt → OK
Server 2: ... → SERVER2 IP → SERVER PORT → OK → pprrt → OK
Server 3: ... → SERVER3 IP → SERVER PORT → OK → pprrt → OK
Value: iiii – 4-digit installer code; pprrt – server port number, range – [1... 65535].
EKB3/
EKB3W/
EWKB4
Enter parameter 44 and server port number/parameter 96, parameter number and
port number:
Server 1: 44 pprrt #
Server 2: 96 04 pprrt #
Server 3: 96 05 pprrt #
Value: pprrt – server port number, range – [1... 65535].
Example: 443365#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.
Set DNS1 server IP
address
EKB2
Menu path:
OK → iiii → OK → GPRS SETTINGS → OK → DNS1 → OK → add. add.add. add → OK
Value: iiii – 4-digit installer code; add.add.add.add – DNS1 server IP address.
EKB3/
EKB3W/
EWKB4
Enter parameter 41 and DNS1 server IP address:
41 add add add add #
Value: add add add add – DNS1 server IP address.
Example: 41065082119001#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.
Set DNS2 server IP
address
EKB2
Menu path:
OK → iiii → OK → GPRS SETTINGS → OK → DNS2 → OK → add. add.add. add → OK
Value: iiii – 4-digit installer code; add.add.add.add – DNS2 server IP address.