. . . . .
CONFIGURATION SCREENS
Miscellaneous Timers Configuration
2-9317-372-00-0 Bravo™ 8105 Programming and Operations Guide 9-103
Timers Parameters
Continued
Alarm Latch (De Bounce)
Time required for an alarm condition to exist (prevents false alarms)
Dev Alarm Inhibit on SP Change – Heaters
Time that the deviation alarms will be inhibited after a change in the heater
setpoint.
Dev Alarm Inhibit on SP Change – Conveyor
Time that the deviation alarms will be inhibited after a change in the conveyor
setpoint.
ConvBlower Change – Heater Alarm Inhibit
Time that the deviation alarms will be inhibited after a change in the
convection blower setpoint.
PID Cycle Timer and PID Period Test
PID period time used in PID calculations. Changing this value may cause
erratic results in the profiles. Change only under factory supervision.
To Next Page
Loading...