. . . . .
BRAVO™ SYSTEM OPERATION
Configuring Security Access and Passwords
2-9317-372-00-0 Bravo™ 8105 Programming and Operations Guide 4-47
Configuring Security Access and Passwords
Introduction The five (5) Security levels must be configured before the Bravo™ System is used.
Refer to the following section to configure or change the access parameters and
the passwords.
ATTENTION
Speedline Electrovert recommends changing the Administrator password after the
five (5) user levels are configured. By default, Administrator–level Security
access allows access to all functions.
To Next Page
Loading...