. . . . .
BRAVO™ SYSTEM OPERATION
Sample Access Profiles
2-9317-372-00-0 Bravo™ 8105 Programming and Operations Guide 4-53
Sample Access Profiles
Introduction If uncertain as to how to structure the user access profiles, refer to the following
section. It is intended as a starting point for user profiles. Modify it according to
need and use.
User Profile: Operator
Access
An Operator needs access to Start and Stop functions, but not maintenance or
configuration functions. A suggested Operator configuration would include Load
Recipe, Relative Board Change, Machine Start and Stop and Motorized Width
Control. Refer to Figure 4–8.
Software
Representation
Figure 4–8 depicts a typical Operator configuration for Security Access:
Figure 4–8
To Next Page
Loading...