Electrovert Bravo 8105 - Security Access; Logging Onto Bravo Software

BRAVO™ SYSTEM OPERATION
Security Access
4-46 Bravo™ 8105 Programming and Operations Guide Rev. 2
4
Section B: Security Controls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security Access
Introduction There are five (5) levels of security access available with the Bravo™ System. To
access Maintenance and Operation Functions it is necessary to have the
appropriate security level active.
Security levels can only be set when the “Administrator” level is active.
Logging Onto Bravo™
Software
Set the level to Administrator by entering the Administrator password when
prompted, or by pressing F11 and selecting Administrator Level.
To view the parameters for the current level when operating the Bravo™ select
the Security > Access Screen
Select a Process Screen to begin machine operation.