Electrovert Bravo 8105 - Changing Passwords; Default Names and Passwords Table

. . . . .
BRAVO™ SYSTEM OPERATION
Changing Passwords
2-9317-372-00-0 Bravo™ 8105 Programming and Operations Guide 4-51
Changing Passwords
Introduction Each User name has a default password. Refer to the following section to change
the User name and/or password.
ATTENTION
Ensure that “Password Required” is selected on the Security Administration
Screen or a password error message appears even if the correct password is
entered.
Default Names and
Passwords Table
The following table lists the default User names and passwords.
ATTENTION
Passwords are case–sensitive. “User1” must be typed exactly as it appears, i.e.,
“user1” is NOT recognized by the program.
User Name Password
User_1 User1
User_2 User2
User_3 User3
User_4 User4
User_5 User5