Emerson Rosemount 2460 System Hub - Page 78

66
Reference Manual
00809-0100-2460, Rev DE
Configuration
October 2018
Configuration
Table 4-4. Entry fields for the Tank Database Auxiliary Inputs
Entry field Description
Auxiliary Inputs
(VP, MP, LP, FWL,
UIn1 - UIn5, Relays,
Advanced)
2410 Tank Hub
 Vapor Pressure
 Middle Pressure
 Liquid Pressure
 Free Water Level
 User Inputs 1 - 5
 Relays
 Delta Level (DL, tank position 1 only)
TRL2 Radar Tank Gauge
 Analog Inputs 1 - 3
Rex
 Analog Inputs 1 - 2
 HART Inputs 1 - 3
 Relays
DAU
 Current Inputs 1 - 4
 Relays
Pro
 None
Enraf
(1)(2)
 Vapor Pressure
 Middle Pressure
 Liquid Pressure
 Free Water Level
 Observed Density (UIn1=Dens)
Whessoe 550
(3)(4)
 Vapor Pressure
(5)
 Liquid Pressure
(5)
Whessoe 660
(4)
 None
Varec
(6)(7)
 None
L&J
(6)(8)
 Vapor Pressure
 Liquid Pressure
 Free Water Level
 Observed Density (UIn1=Dens)
1. Enraf option is supported for Rosemount 2460 firmware version 1.B0 and higher.
2. See Appendix C: Enraf® Device Configuration for information on how to configure the Rosemount 2460 tank database
for Enraf devices.
3. Whessoe option is supported for Rosemount 2460 firmware version 1.D0 and higher
4. See Appendix E: Whessoe Device Configuration for information on how to configure the Rosemount 2460 tank
database for Whessoe devices
5. Vapor or Liquid pressure can be selected, not both.
6. L&J and Varec options are supported for Rosemount 2460 firmware version 1.E0 and higher
7. See Appendix I: Varec® Device Configuration for information on how to configure the Rosemount 2460 tank database
for Varec devices
8. See Appendix H: L&J Device Configuration for information on how to configure the Rosemount 2460 tank database for
L&J devices