Endress+Hauser Levelflex FMP55 - Page 163

Levelflex FMP55 HART Operating menu
Endress+Hauser 163
"Deactivate SIL/WHG" wizard
The Deactivate SIL/WHG wizard (→  163) is only visible if the device is SIL-locked
or WHG-locked. For details refer to the "Functional Safety Manual" of the respective
device.
Navigation  Setup → Advanced setup → Deactivate SIL/WHG
Reset write protection 
Navigation  Setup → Advanced setup → Deactivate SIL/WHG → Reset write protection
Description Enter unlocking code.
User entry 0 to 65 535
Factory setting 0
Code incorrect 
Navigation  Setup → Advanced setup → Deactivate SIL/WHG → Code incorrect
Description Indicates that a wrong unlocking code has been entered. Select procedure.
Selection • Reenter code
• Abort sequence
Factory setting Reenter code