3 Transducer Blocks (transmission blocks) PROline Prosonic Flow 93 FOUNDATION Fieldbus
130 Endress+Hauser
Configuration -
Language
AUTO - OOS Use this parameter to select the language for all texts, parameters
and messages shown on the local display.
Options:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
DANSK
NORSK
SVENSKA
SUOMI
BAHASA INDONESIA
JAPANESE (syllabary)
Factory setting:
Depends on country, see factory setting on Page 76 ff.
Configuration-
Display
Damping
AUTO - OOS Use this parameter to enter a time constant defining how the display
reacts to severely fluctuating flow variables, either very quickly
(enter a low time constant) or with damping (enter a high time
constant).
User input:
0...100 seconds
Factory setting:
1 s
Note!
Setting the time constant to "0" seconds switches off damping.
Configuration -
Contrast LCD
AUTO - OOS Use this function to optimise display contrast to suit local operating
conditions.
User input:
10...100%
Factory setting:
50%
“TRANSDUCER_DISP” (E+H parameters) / base index 1500
Parameter Write access
with operating
mode
(MODE_BLK)
Description
To Next Page
Loading...
