Endress+Hauser Proline Prosonic Flow 93 Function Manual

2 Resource Block PROline Prosonic Flow 93 FOUNDATION Fieldbus
98 Endress+Hauser
WRITE_LOCK read only Displays the status of the hardware write protection.
Display:
UNINITIALIZED
LOCKED
It is not possible to write to the device via the FOUNDATION
Fieldbus.
NOT LOCKED
Device data can be modified via the FOUNDATION Fieldbus.
 Note!
For information on hardware write protection configuration, see the
Operating Instructions for PROline Prosonic Flow 93 FOUNDATION
Fieldbus, BA078D/06/en, Section 5.4.
WRITE_PRI AUTO - OOS Specifies the action taken in the event of a write protection alarm,
(WRITE_ALM parameter, see Page 97).
User input:
0
The write protection alarm is not evaluated.
1
No report to the fieldbus host system in the event of a write
protection alarm.
2
Reserved for block alarms.
3-7
The write protection alarm is output with the appropriate priority
(3 = low priority, 7 = high priority) to the fieldbus host system as a
user notice.
8-15
The write protection alarm is output with the appropriate priority
(8 = low priority, 15 = high priority) to the fieldbus host system as a
critical alarm.
Factory setting:
0
Resource Block / base index 258
Parameter Write access with
operating mode
(MODE_BLK)
Description

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English