146
Adjusting Color Uniformity
Adjusting the Lamp's Brightness
Matching the Image Colors
Adjusting RGBCMY
Parent topic: Adjusting Projector Features
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Note: In some cases the brightness and color tone from different projectors may not match completely
even after color correction. If the brightness and color tone differences become more noticeable over
time, repeat the adjustments.
Setting the Projector ID
Setting the Remote Control ID
Parent topic: Using Multiple Projectors (Duolink)
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Multi-Projection setting and press Enter.
To Next Page
Loading...
Need help?
General