Epson BrightLink 697Ui User Manual

299
Event ID code Cause and solution
0BFF An error has occurred in the whiteboard function. Restart the projector.
Parent topic: Projector Information Display - Info Menu
Related references
Projector Network Settings - Network Menu
Related tasks
Setting Up Wireless Network Security
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option.
You cannot reset the following settings using the Reset All Config option:
• Input Signal
• User's Logo
• Schedule Settings

Epson BrightLink 697Ui Specifications

General

Display Technology	3LCD
Resolution	WUXGA (1920 x 1200)
Contrast Ratio	16, 000:1
Lamp Life	10, 000 hours (Eco mode)
Interactive	Yes
Built-in Speakers	16 W
Brightness	4000 lumens
Connectivity	HDMI, USB, VGA, LAN
Wireless Connectivity	Optional (Wireless LAN Unit ELPAP10)
Projection Size	60 inches - 100 inches