150
8. Select the area you want to adjust and press Enter.
9. Select Red, Green, or Blue and press the left arrow button to weaken the color tone or the right
arrow button to strengthen the color tone.
Note: The adjustment screen changes each time you press Enter.
10. Press Esc to return to the area selection screen.
11. Repeat steps 9 through 11 for each area, then select All to adjust the entire screen.
12. Press Esc to exit the menus.
Parent topic: Using Multiple Projectors (Duolink)
Adjusting the Lamp's Brightness
When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are
as bright as the darkest lamp. (Even after adjusting the brightness levels, the brightness of each lamp
may not match exactly.)
1. Turn on all the projectors and display the same image.
To Next Page
Loading...
Need help?
General