EasyManuals Logo

Epson BrightLink 697Ui User Manual

Epson BrightLink 697Ui
582 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
230
• Always apply password lets you require that whiteboard files must be saved as password-
protected PDF or EWF files.
• CIFS Server lets you set the CIFS server's IP address or fully qualified domain name (FQDN).
You can enter up to 63 alphanumeric characters.
Note: You cannot use the following characters: " ' + , : ; < = > ? [ \ ] ` | or spaces. If you need to
enter more characters, enter them using the Web Config utility. To use a FQDN, you must
configure a DNS server. Enter a port number by adding it after the address or name and
separating it with a colon, for example, FQDN:port_number or IP_address:port_number. You
cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to 255.255.255.255.
• Shared Folder Path lets you enter the network folder name in this format:
share_name\folder_name. You can enter up to 63 alphanumeric characters. You cannot use the
following characters: " ' / : < > ? or |.
• User name lets you enter a user name with read/write privileges on the network folder. You can
enter up to 64 alphanumeric characters. You can enter a domain name by adding it before the
user name and separating them with a backslash in this format: domain\username.
• Password lets you enter a password for the user name you entered. You can enter up to 64
alphanumeric characters. After you enter the password and select Setup complete, the password
is hidden.
• Check Connection lets you test the network connection.
Note: Use the displayed keyboard to enter the address, user name, and password if necessary.
Press the arrow buttons on the remote control to highlight numbers and press Enter to select them.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic: Selecting Whiteboard Settings
Selecting Settings for Emailing Whiteboard Pages
You can select the settings for emailing whiteboard pages from the projector.
1. Press the Menu button on the remote control.

Table of Contents

Other manuals for Epson BrightLink 697Ui

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 697Ui and is the answer not in the manual?

Epson BrightLink 697Ui Specifications

General IconGeneral
BrandEpson
ModelBrightLink 697Ui
CategoryProjector
LanguageEnglish

Related product manuals