262
Splitting the Interactive Screen
You can split the screen and project from two sources at the same time. You can annotate and interact
with both sources.
Note: If you make adjustments such as Brightness, Contrast, Color Saturation, Tint, Sharpness,
Noise Reduction, and Deinterlacing, they are only applied to the image on the left. Default
adjustments are made to the image on the right.
1. Press the Split button on the remote control and select the Split tool on the bottom toolbar, or
select the Split tool directly.
Note: If you press the Split button, the current image is reduced and appears on the left side of the
projection surface.
You see a screen like this:
To Next Page
Loading...
