228
5. Select the following printing options as necessary:
• Default Printer lets you select either USB or Network as the printer connection. You can change
this setting when you print in whiteboard mode, but not in annotation mode.
Note: Selecting USB will also enable scanning from Epson All-in-One printers.
• Quality lets you select the default print quality.
• Paper Size lets you select either Letter , A4, or A3 as the default paper size.
• IP Address lets you enter an IP address for a printer connected to the same network as the
projector.
• Printer Type lets you manually select the printer type or let the projector automatically determine
the printer type
• Job username lets you assign a user name for print jobs up to 31 alphanumeric characters long.
Do not use a colon (":") or spaces in the user name.
• Test Print lets you send a test page to the connected printer.
Note: Use the displayed keyboard to enter the IP address if necessary. Press the arrow buttons on
the remote control to highlight numbers and press Enter to select them.
6. When you finish selecting settings, select Setup Complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic: Selecting Whiteboard Settings
Selecting Settings for Saving Whiteboard Pages
You can select the default settings for saving whiteboard pages from the projector.
1. Press the Menu button.
To Next Page
Loading...
Need help?
General