265
3. Do any of the following as necessary:
• To make one image larger than the other, select a Screen Size setting.
• To use the interactive pen as a mouse with a computer source, select a Target Pen Mode setting.
• To select the audio from either screen, select an Audio Source setting. Select Auto to hear audio
from the left screen or larger screen.
4. Select the icon to exit the settings screen.
Parent topic: Splitting the Interactive Screen
Using Interactive Features with Two Projectors
You can use your projector's interactive features while projecting with two projectors installed side by
side. To get started, install the software from the Easy Interactive Function CD.
See the installation guide that came with your projector mount for instructions on installing multiple
projectors and selecting settings for interactive features.
Note: You may not be able to write and draw across the border of the images.
Temporarily Using Interactive Features on One Projector
Parent topic: Using the Interactive Features
Temporarily Using Interactive Features on One Projector
When you use the interactive features on an image projected by two side-by-side projectors, you can
temporarily limit the interactive features to one of the projectors.
1. Press the Home button on the remote control or projector or the icon on the projector control
toolbar.
To Next Page
Loading...
Need help?
General