45
1. Connect the USB cable to your projector's USB-B port.
2. Connect the other end to any available USB port on your computer.
If you want to use the remote control as a wireless mouse, you need to change the USB Type B setting
in the projector's Extended menu. You may also need to configure your computer to work with an
external USB mouse. See your computer documentation for details.
Parent topic: Connecting to Computer Sources
Related references
Projector Setup Settings - Extended Menu
Connecting a Computer to the Control Pad
If your computer meets the system requirements, you can send video and audio output to the projector
through the control pad's USB-B port (preferably USB 2.0). Connect the projector and your computer to
the control pad using USB cables.
1. Turn on your computer.
2. Set the USB Type B setting in the External menu to one of the USB Display options.
To Next Page
Loading...
Need help?
General