219
• Press and drag on the screen to pan around the enlarged area.
3. When splitting the screen, do the following as necessary:
• Select the icon to display the entire whiteboard.
• Select the icon to display the entire whiteboard vertically.
Parent topic: Whiteboard Mode
Inserting and Working With Images
In whiteboard mode, you can use the Insert Image tool to insert an image from a thumbdrive or a
network folder. Images can be in .png or .jpg format, with a maximum size of 2048 × 2048 pixels. Once
the image is projected, you can move, resize, rotate, or crop it.
Note: You can also use the tool on the bottom toolbar to import files (including pdf files) in
whiteboard mode.
1. Select the Insert Image tool.
2. Select the image you want to add, then select Insert Image.
After a moment, the image appears on the whiteboard page.
3. Once you have selected the image, select either the Rectangle Select or Free Select tool
and do any of the following as necessary:
• To move the image, touch inside it and drag the image.
• To resize the image, touch any corner and drag inward to shrink or outward to enlarge.
• To rotate the image, touch the round icon at the top of the image and drag left or right.
• To crop the image, select and drag the side of the image.
4. Use the menu in the bottom right corner of the image to select any of the following as necessary:
• Cut removes the image from the whiteboard. Touch a location on the screen to paste the image
again.
To Next Page
Loading...
Need help?
General