61
2. Connect another USB cable to the Printer port on the control pad. Make sure the cable is no longer
than 16.4 ft (5 m).
3. Connect the other end of the cable to the USB type B port on the printer.
Note: You can connect a wireless printer by selecting Network as the Whiteboard Settings > Print
> Default Printer setting in the Extended menu.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting Multiple Projectors of the Same Model
If you use the interactive features of multiple projectors of the same model in the same room, you need
to synchronize the projectors. To do this, connect the optional remote control cable set (V12H005C28) or
a stereo mini cable to the SYNC port on each projector.
To Next Page
Loading...
Need help?
General