62
1. Connect one end of the cable to the SYNC In port on one projector, and connect the other end to the
SYNC Out port on the other projector.
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. In the Extended menu of each projector, set the Sync of Projectors setting to Wired.
Note: If you are syncing multiple projectors with a combination of wired and infrared connections, set
the Wired Sync Mode setting to Mode 2 in each projector's Extended menu. If you are syncing
using an infrared connection and the projectors are more than 6.6 feet (2 m) apart, set the Distance
of Projectors setting to Mode 1 in each projector's Extended menu.
Parent topic: Projector Connections
Related concepts
Using Multiple Projectors (Duolink)
Related references
Projector Setup Settings - Extended Menu
To Next Page
Loading...
Need help?
General