297
Event ID code Cause and solution
0020 A screen mirroring communication error has occurred. Turn the projector off and on
again, or restart the network software.
0026
0032
0036
0037
0038
0021 Failed to start Screen Mirroring. Turn the projector off and on again.
0022 Unstable screen mirroring communication. Check the network communication
status, wait a few moments, and try connecting to the network again.
0027
0028
0029
0030
0031
0035
0023 Connection failed. If you see the PIN entry screen on your computer, enter the PIN
code displayed on the Screen Mirroring standby screen or at the bottom right of the
projected image. If this does not solve the problem, restart the projector and the
connected devices, and then check the connection settings.
0024
0025
0432 The network software did not start. Turn the projector off and then on again.
0435
0434 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0433 Cannot display the transferred images. Restart the network software.
0484 Communication with computer was disconnected. Restart the network software.
To Next Page
Loading...
Need help?
General