Epson BrightLink 697Ui User Manual

58
2. Connect a USB cable to the USB-A port on the projector and to the USB-B port on the control pad.
3. Connect the USB cable for the device (or USB flash drive ) to the USB-A port on the bottom of the
control pad.
4. Connect the other end of the cable (if applicable) to your device.
Note: You can also connect a USB device directly to the projector's USB-A port.

Epson BrightLink 697Ui Specifications

General

Brand	Epson
Model	BrightLink 697Ui
Category	Projector
Language	English