1-2 General Information Rev. E
1.1.2 Slip/ Validation/ Endorsement Section (Validation/ Endorsement option)
❏ High throughput using bidirectional, minimum distance printing.
❏ Page mode for flexibility in printing formats
❏ Two ways are available for slip paper loading (drop- in for validation, and front insertion for
slip)
❏ An endorsement printer (E/P) that enables single-pass high speed printing of
endorsements.(The endorsement printer cannot be installed on a printer with the validation
function.)
❏ Line spacing cannot be changed for an endorsement printer.
1.1.3 MICR section (Option)
❏ A Magnetic Ink Character Recognition (MICR) reader that enables the printer to perform
consecutive reading and processing of MICR characters
1.1.4 Image scanner section (Option)
❏ The sharpness function is supported.
❏ Single-pass processing for checks eliminates the need to reverse the check paper for printing
an endorsement.(The validation function model doesn't have an endorsement printer.)
1.1.5 Card image scanner section (Option)
❏ Card can be scanned as an image based on ISO/IEC7810
❏ Operation is as easy as using a card in an ATM.
1.1.6 Others
❏ Small footprint and simple design
❏ EPSON customer display modules (DM-D***) can be connected (available only for the serial
interface model)
❏ NV (Non-volatile) bit image buffer (384 KB) *
❏ NV (Non-volatile) user memory (1 KB) *
❏ A counter function that allows checking the printer by remote maintenance
❏ Several interface models (USB, RS-232, bidirectional parallel, Ethernet) are supported
* The memory size can be set by ESC/POS command.
1.1.7 About control method
❏ Command protocol based on the ECS/POS
®
Proprietary Command System.
❏ Automatic Status Back (ASB) function that automatically transmits changes in the printer
status
❏ Windows
®
printer driver is provided. (Advanced Printer Driver, OPOS and JavaPOS)
To Next Page
Loading...
Need help?
General