Epson H6000III - TM Two-color Thermal Line - Paper Specifications

Rev. E General Information 1-9
TM-H6000III Technical Reference Guide
1.4.2.1 Paper Specifications
1. Cut sheet
Paper type: Normal paper, pressure-sensitive paper, carbon copy paper
Paper size: 68 - 230 mm (W)
× 68 - 297 mm (L) {2.7 - 9.1"(W) × 2.7 - 11.7"(L)}
NOTE: The minimum size is 68mm
× 152mm {2.7" × 6.0"}
Copy capability and paper thickness:
• Normal paper (single-ply):0.09 to 0.2 mm {0.0035 to 0.0079"}
• Carbon copy paper
combination:4 sheets maximum
• Example: one original + 2 copies,
Ambient temperature and copy capability:
Copy capability is greatly influenced by the ambient temperature, so printing must be
performed under the conditions described in the table below.
Backing paper: 0.07 to 0.12 mm {0.0028 to 0.0047"}
Copy and original: 0.04 to 0.07 mm {0.0016 to 0.0028"}
Carbon paper: Approximately 0.035 mm {0.0014"}
Total thickness: 0.09 to 0.31 mm {0.0035 to 0.0122"}
Original paper: 0.04 mm
Carbon paper: 0.07 mm (0.035 mm
× 2 sheets)
Copy paper: 0.04 mm
Backing paper: 0.07 mm
Total thickness: 0.22 mm {0.0087 "}
Relationship between ambient temperature and number of copies
Number of copies Ambient temperature
Original + 3 copies 10 to 40
°C {50 to 104°F}
Original + 1 copy 5 to 45
°C {41 to 113 °F}