1-30 General Information Rev. E
1.6.4 Environmental Conditions
Operating temperature and humidity range
Temperature: Operating: 5 C° to 45 C° {41F° to 113F° }
Storage: –10C° to 50 C° {14F° to 122F° }
(except for paper and ribbon)
Humidity: Operating: 10 to 90% RH
Storage: 10 to 90% RH (except for paper and ribbon)
Vibration resistance: When packed:
Frequency: 5 to 55 Hz
Acceleration: 2 G
Sweep: 10 minutes (half cycle)
Duration: 1 hour
Directions: x, y, and z
No external or internal damage should be found after the
vibration test, and the unit should operate normally.
Impact resistance: When packed:
Package: EPSON standard package
Height: 50 cm {19.69"}
Directions: 1 corner, 3 edges, and 6 surfaces
No external or internal damage should be found after the
drop test, and the unit should operate normally.
When unpacked:
Height: 5 cm {1.97"}
Directions: Lift one edge and release it (for all 4 edges).
When the printer is not printing, no external or internal
damage should be found after the drop test.
Acoustic noise (operating): Receipt:
When using autocutter:
Approximately 52 dB (bystander position)
Relative humidity
0
10
20
40
60
80
90
010
20
40
30
Operating environment
range
Ambient
temperature
50
To Next Page
Loading...
