Rev. E v
TM-H6000III Technical Reference Guide
About This Manual
Aim of the Manual
This manual was created to provide the information on the TM-H6000III printer for anyone who
is developing hardware, installations, or programs. Programmers will also want to consult other
documents.
Contents of the Manual
Key to Symbols
The following symbols are used in the documentation for this product. See the specific warnings
and cautions at appropriate points throughout this guide.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid minor injury to yourself or damage to your
equipment.
Note:
Notes have important information and useful tips on the operation of your printer.
Chapter 1 General Information: General description of features plus specifications.
Chapter 2 System Planning: Contains introduction of control methods (APD,
OPOS, JavaPOS, and ESC/POS) and each
connection form.
Chapter 3 Setup: Contains information on such matters as DIP
switches, memory switches, error processing for
using TM-H60000III.
Chapter 4 Maintenance & Troubleshooting: Contains useful information for using.
Chapter 5 Application Development
Information for UPOS:
Contains useful information for programming.
Chapter 6 Application Development
Information for APD:
Contains useful information for programming.
Chapter 7 Application Development for
Image Scanner:
Contains useful information for general
programming with the TM-H6000III.
Appendix A Character Code Tables: Contains the character code tables.
Appendix B Power Supply Specifications: Contains the specifications.
Appendix C FAQ: Contains FAQ for interfaces.
Appendix D Comparison Table: Comparison table for TM-H6000II with Image
Scanner, TM-H6000II Photo-ID Model, TM-
H6000III with Image Scanner, TM-H6000III Photo-
ID Model.
To Next Page
Loading...
Need help?
General