Rev. E General Information 1-17
TM-H6000III Technical Reference Guide
1.4.4 MICR Reader (Option)
1.4.4.1 Reading method
Magnetic bias
1.4.4.2 Recognition rating
98% or more (at 25 ° C, 77 ° F)
Recognition rating is defined as follows
• Check paper used for test is EPSON standard check paper.
• Checks must be flat, without curls, folds, or wrinkles.
1.4.4.3 Inserting direction and endorsement printing
❏ Insert the check with the surface printed with the magnetic ink upward, following the slip
side guide.
Area of personal check where MICR character recognition is impossible
Recognition rationg (%) =
Total number of checks - (number of sheets misread or not identified.)
Total number of checks
100