Maintenance 4. Backup and Restore
130 RC700 / RC700-A Rev.23
(4) Click the <OK> button to display the dialog to select the restore data.
Robot name, serial #, calibration
This checkbox allows you to restore the robot name, robot serial number, Hofs data,
and CalPls data. Make sure that the correct Hofs data is restored. If the wrong
Hofs data is restored, the robot may move to wrong positions.
The default setting is unchecked.
Robot maintenance configuration
This checkbox allows you to restore the robot alarm related files.
For details, refer to Maintenance 6 Alarm.
This is not checked by the default setting.
Project
This checkbox allows you to restore the files related to projects.
The default is unchecked.
When a project is restored, the values of Global Preserve variables are loaded.
For details about Global Preserve variable backup, refer to EPSON RC+ 7.0 User’s
Guide 5.10.10 Display Variables Command (Run Menu).
Vision hardware configuration
This checkbox allows you to restore the vision hardware configuration.
For details, refer to EPSON RC+ 7.0 option Vision Guide 7.0.
This is not checked by the default setting.
Security configuration checkbox
This checkbox allows you to restore the security configuration.
For details, refer to EPSON RC+ 7.0 User’s Guide 15. Security.
This is not checked by the default setting.
Force Sensing I/F configuration
This checkbox allows you to restore the Force Sensing I/F configuration.
For details, refer to EPSON RC+ 7.0 option Force Guide 7.0.
This is not checked by the default setting.
(5) Click the <OK> button to restore the system information.
To Next Page
Loading...
Need help?
General
