Epson RC700 Series User Manual

Maintenance 4. Backup and Restore
RC700 / RC700-A Rev.23 129
4.4 Restore
Restore the Controller status from the EPSON RC+ 7.0.
CAUTION
■
Make sure that the data used for restore was saved previously for same
Controller.
■
Do not edit the backup files. Otherwise, operation of the robot system
after data
restoration to the Controller is not assured.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller
Tools] dialog.
(2) Click the <Restore Controller…> button to display the [Browse For Folder] dialog.
(3) Specify the folder that contains the backup data. Backup data folders are named
using the following format:
B_ RC700_ serial number_ date status was saved
→ Example: B_RC700_12345_2011-04-03_092941
Data saved to the USB memory by the Backup Controller function can also be
specified for restore.

NOTE

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4