Epson RC700 Series User Manual

Maintenance 2. Regular Maintenance Inspection
RC700 / RC700-A Rev.23 123
2. Regular Maintenance Inspection
Performing regular maintenance inspection properly is essential for preventing trouble and
maintaining safety. This chapter describes the schedules for maintenance inspection and
procedures.
Be sure to perform the maintenance inspections in accordance with the schedules.
Part
Fan filter
Fan (Front)
Fan (Rear)
Battery
Content
Cleaning
Replacement
Replacement
Replacement
Replacement
Code
-
R13N865021
2195106
R13B060510
R13B060510
R13B060003
Quantity
-
1
1
1
1
Maintenance
interval
More than once a
month is
recommended
When the filter
gets
deteriorated
When the error
515 occurs, or
when the
abnormal
noise occurs
When the error
516 occurs, or
when the
abnormal
noise occurs
Every 5 years,
or when the
error 511
occurs
Possible
malfunction
if maintenance
is not performed
The temperature
inside the
Controller may
get too high and
the robot system
may not operate
properly.
The error may
occur due to
reduction of the
fun rotation.
The robot
system may not
operate
properly due to
dust or the like.
The error 9015
occurs and the
robot system
may stop.
The error 9016
occurs and the
robot system
may stop.
The error 9011
occurs and the
robot system
may stop.
Duration
(reference)
5 minutes 5 minutes 20 minutes 15 minutes 5 minutes
Reference:
Maintenance
7.1
Fan Filter
7.1
Fan Filter
7.2.1
Front Fan
7.2.2
Regenerative
Fan (RC700-A
only)
7.3
Battery
Expected
product life
- - 30,000 hours 30,000 hours -

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4