Epson RC700 Series User Manual

Safety 3. Safety Precautions
6 RC700 / RC700-A Rev.23
The following items are safety precautions for qualified operator personnel:
WARNING

The interlock of the Safety Door must be functioning when the
robot system is
operated. Do not operate the system under the condition that the switch cannot
be turned ON/OFF. (I.E. the condition where the switch is disabled)
(Example: Tape is put around
the switch to hold it closed.) Operating the robot
system when the switch is not
functioning properly
is extremely hazardous and
may
cause serious safety problem
s as the Safety Door input cannot fulfill its
intended function
.
WARNING

Do not open
the cover(s) of the Controller except while maintaining it. Opening
the cover(s) of the Controller is
extremely hazardous
and may result in electric
shock
even when its main power is OFF because of the high voltage charge
inside the Control
ler.

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4