Epson RC700 Series User Manual

Maintenance 10. Maintenance Parts List
304 RC700 / RC700-A Rev.23
Option
Part Name
Code
Old Code
Note
Expansion I/O Board (Source
type)
R12NZ9003P
R12B040302
Expansion I/O Board (Sink type)
R12NZ9003Q
R12B040303
RS-232C Board
R12NZ9004E
R12B040726
DeviceNet Board
R12NZ9004F
R12B040727
DeviceNet module is
mounted on the Fieldbus
Board.
PROFIBUS Board
R12NZ9004H
R12B040729
PROFIBUS-DP module is
mounted on the Fieldbus
Board.
CC-Link Board
R12NZ9004J
R12B040730
CC-Link module is
mounted on the Fieldbus
Board.
PROFINET Board
R12NZ900A6
R12N747051
PROFINET module is
mounted on the Fieldbus
Board.
EtherNet/IP Board
R12NZ900A7
R12N747061
EtherNet/IP module is
mounted on the Fieldbus
Board.
EtherCAT Board
R12NZ900CL
−
EtherCAT module is
mounted on the Fieldbus
Board.
PG Board
R12NZ900A8
R12N748011
Analog I/O Board (1CH)
R12NZ900WZ
−
Analog I/O Board (4CH)
R12NZ900X1
−
Force Sensor I/F Board (FS2)
2184536
−
EUROMAP67 Board
R12NZ90104
−
EUROMAP67 Board
(without IMM connection cable)
R12NZ9010A
−
EUROMAP67
without Cable2
EUROMAP67 Cable1
2194667
−
For EUROMAP67 Board
Emergency Stop cable
EUROMAP67 Cable2
2194668
−
For EUROMAP67 Board
IMM Connection cable
EUROMAP67 Emergency
Connector
Plug
2165789
−
For EUROMAP67 Board
Soldering plug
EUROMAP67 Emergency
Connector
Shell
2194882
−
For EUROMAP67 Board
Shell kit

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4